| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| advice on replacing a clear self adhesive pickguard http://www-.luthiersforum.com/forum/viewtopic.php?f=10137&t=47423 |
Page 1 of 1 |
| Author: | Bob Orr [ Wed Mar 09, 2016 6:06 am ] |
| Post subject: | advice on replacing a clear self adhesive pickguard |
Hi a friend has asked me to replace the clear plastic pick guard on his Oakwood bouzouki and I am looking for any advice on the best way to tackle this. Regards, Bob |
|
| Author: | Ben-Had [ Wed Mar 09, 2016 8:59 am ] |
| Post subject: | Re: advice on replacing a clear self adhesive pickguard |
I remove PGs by heating them with a hair dryer and spatula. It doesn't need to get to hot (in fact you shouldn't). Keep it moving over the PG. Any remaining residue I remove with Naptha. Then apply the new PG. |
|
| Author: | Frank Ford [ Wed Mar 09, 2016 2:20 pm ] |
| Post subject: | Re: advice on replacing a clear self adhesive pickguard |
Here's some stuff on installing clear guards: http://www.frets.com/FretsPages/Luthier ... uard1.html |
|
| Author: | Bob Orr [ Wed Mar 09, 2016 5:06 pm ] |
| Post subject: | Re: advice on replacing a clear self adhesive pickguard |
thanks guys much appreciated. Bob |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|